Electric Protein Shaker Bottle, Portable, Rechargeable Blender Cup Automatic Self Stirring Mug

SPECIFICATIONS

Product Category: Electric Shaker Cup

Capacity: 650 ml

Choice: yes

Hign-concerned Chemical: None

Cup Material: Tritan

Capacity: 650ml

Speed Speed: 7000rpm High Speed

Battery Capacity: 1200 mah

Item Size: 92 x 200mm

Weight: 333g

Attention!

It Is Recommended That The Water Temperature Exceeds 70°. Do Not Shake When It Is Filled With Hot Water, Please Open The Lid And Stir To Prevent The Air Pressure In The Cup From Being Too Large And The Bullet Is Opened, And It Will Be Burned!

How to use

The cup does not work during charging.

Start: Press and hold for 2 seconds to start.

The red light turns on during charging and the white light turns on when fully charged. Bright white light when working.

The white light flashes to indicate that there is no power and needs to be charged before use.

The outside of the cup body cannot be rinsed under the faucet, especially the rubber plug of the charging hole at the base and the switch button. It is recommended to wipe the outside of the cup with a damp cloth. The inside of the cup can be rinsed with water

Note:

1. The base of the cup body can not be washed under the faucet, especially the charging hole of the base must be tightly packed. There should be no water on the switch button. The cup won't work properly after it's flooded.

Also: The cup does not work while charging.

2. The blinking white light indicates that there is no power and needs to be charged before use.

3. The red light is on when charging, and the white light is on when fully charged. Make sure to unplug the charging cable and press and hold to start.

4. After the powder cartridge is loaded with milk powder, the lid of the powder cartridge should be tightened on the powder cartridge, and the sound of "click" will be in place. Only when the compact lid is tightened on the compact lid, it will not leave the compact lid inside the lid after being put into the lid.

If the powder cartridge is removed from the cup, but the powder cartridge cap is left inside the lid, then the powder cartridge needs to be screwed on the powder cartridge cap, after tightening, and then stand back a little, you can take out the powder cartridge cap. The cause of the problem is that the workers put the powder cartridge in the lid without tightening the lid.

Special note: when you take out the powder cartridge yourself, and when loading the powder cartridge into the cup body, be sure to vertical, do not let the edge of the powder cartridge scratch the transparent cup body.

Carefully remove the cup from the box and place it in the box. Do not scratch the outside of the glass in either motion